Lenze E94ARNE Regenerative power supply - Manual (Page 31)

EDS94ARNExxxx EN 2.3 - 06/2014
L
31
9400 regenerative power supply module | Parameter setting
Regenerative power supply module application
Signal configuration
3.2.2 Output ports
If required, the default signal configuration of the output ports can be easily reconfigured
by parameterising the multiplexer parameters assigned.
Output port "LPortAxisOut1"
The output port LPortAxisOut1 is intended for the connection to a following axis.
Signal (Lenze setting) Output port Signal configuration
Axis status word
• Application-specific signals can be added.
FALSE  Axis status word bit 00 C03120/1
FALSE  Axis status word bit 01 C03120/2
FALSE  Axis status word bit 02 C03120/3
FALSE  Axis status word bit 03 C03120/4
FALSE  Axis status word bit 04 C03120/5
FALSE  Axis status word bit 05 C03120/6
FALSE  Axis status word bit 06 C03120/7
FALSE  Axis status word bit 07 C03120/8
FALSE  Axis status word bit 08 C03120/9
FALSE  Axis status word bit 09 C03120/10
FALSE  Axis status word bit 10 C03120/11
FALSE  Axis status word bit 11 C03120/12
FALSE  Axis status word bit 12 C03120/13
FALSE  Axis status word bit 13 C03120/14
FALSE  Axis status word bit 14 C03120/15
FALSE  Axis status word bit 15 C03120/16
Setpoints for horizontal communication
0 %  Axis port out 1 (16 bits) C03124/1
0 %  Axis port out 2 (32 bits) C03124/2