Lenze E94ARNE Regenerative power supply - Manual (Page 238)

9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
238
L
EDS94ARNExxxx EN 2.3 - 06/2014
Application and device are incompatible [0x008c000c]
MXI1: Module is missing or incompatible [0x008c000d]
MXI2: Module is missing or incompatible [0x008c000e]
MXI1: PROFIBUS module is missing or incompatible [0x008c000f]
MXI2: PROFIBUS module is missing or incompatible [0x008c0010]
MXI1: Ethernet module is missing or incompatible [0x008c0011]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Application is incompatible with the regenerative power
supply module.
• Download an application that is compatible with the
regenerative power supply module via the Engineer.
• Switch off regenerative power supply module and
insert another memory module that is suitable for the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in module slot MXI1 is
incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The extension module in module slot MXI2 is
incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The communication module E94AYCPM (PROFIBUS) in
module slot MXI1 is incompatible with the application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The communication module E94AYCPM (PROFIBUS) in
module slot MXI2 is incompatible with the application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The communication module E94AYCEN (Ethernet) in
module slot MXI1 is incompatible with the application.
Use communication module supported by the
application.