Lenze E94ARNE Regenerative power supply - Manual (Page 239)

EDS94ARNExxxx EN 2.3 - 06/2014
L
239
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
MXI2: Ethernet module is missing or incompatible [0x008c0012]
MXI1: ICM module is missing or incompatible [0x008c0015]
MXI2: ICM module is missing or incompatible [0x008c0016]
MXI1: CAN module is missing or incompatible [0x008c0017]
MXI2: CAN module is missing or incompatible [0x008c0018]
Parameter set faulty [0x00900000]
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The communication module E94AYCEN (Ethernet) in
module slot MXI2 is incompatible with the application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The ICM extension module in module slot MXI1 is
incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The ICM extension module in module slot MXI2 is
incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The CANopen communication module in module slot
MXI1 is incompatible with the application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The CANopen communication module in module slot
MXI2 is incompatible with the application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Parameter set is invalid. Transfer parameter set from the Engineer to the
regenerative power supply module and save it with
C00002 ="11".