Lenze E94ARNE Regenerative power supply - Manual (Page 289)

EDS94ARNExxxx EN 2.3 - 06/2014
L
289
9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C00188
C00188
C00199
C00200
C00201
C00203
Parameter | Name:
C00188 | ENP: Status
Data type: UNSIGNED_8
Index: 24387
d
= 5F43
h
Selection list (display only)
0 No ENP found
1 ENP data loaded
2 Known ENP found
3 ENP found but not read
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C00199 | Device name
Data type: VISIBLE_STRING
Index: 24376
d
= 5F38
h
Device name to be defined by the user (e.g. "cross cutter" or "lifting axis 1") with max. 128 characters
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C00200 | Firmware product type
Data type: VISIBLE_STRING
Index: 24375
d
= 5F37
h
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C00201 | Firmware - compiling date
Data type: VISIBLE_STRING
Index: 24374
d
= 5F36
h
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C00203 | HW product types
Data type: VISIBLE_STRING
Index: 24372
d
= 5F34
h
Subcodes Information
C00203/1 Type: Control card
C00203/2 Type: Power section
C00203/3 Type: Module in MXI1
C00203/4 Type: Module in MXI2
C00203/5 Type: Memory module
C00203/6 Type: Safety module
C00203/7 Type: Standard device
C00203/8 Type: Complete device
C00203/9 Type: ENP
 Read access  Write access  CINH  PLC STOP  No transfer