19 reset max dc power reg, Reset max dc power reg – Lenze E94ARNE Regenerative power supply User Manual
Page 59
Advertising
EDS94ARNExxxx EN 2.3 - 06/2014
L
59
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.19
Reset max DC power reg.
This function is available from software version V2.0 onwards!
The
= "61: Reset max DC power reg." device command serves to reset the value
to zero. At the same time, the time stamp corresponding to this
) is set to the current state of the elapsed-hour meter (= time of
Possible status displays for this device command
Related device commands
Status (
Meaning
4031746 Device command in process
3997696 Device command executed successfully
3997697 General fault
Advertising