Lenze E94ARNE Regenerative power supply - Manual (Page 336)

9400 regenerative power supply module | Parameter setting
Parameter reference
Parameter list | C02752
336
L
EDS94ARNExxxx EN 2.3 - 06/2014
C02752
C02753
C02754
C02755
Parameter | Name:
C02752 | LI_dnActualLineVoltage
Data type: INTEGER_32
Index: 21823
d
= 553F
h
From software version V2.0 onwards
Current mains voltage in [%]
• 100 % ≡ 1000 V
Display range
(min. value | unit | max. value)
0.00 % 200.00
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 100
Parameter | Name:
C02753 | LI_dnActualPower
Data type: INTEGER_32
Index: 21822
d
= 553E
h
From software version V2.0 onwards
Current power in [%]
• 100 % ≡ P
max_device
( C00057 )
Display range (min. value | unit | max. value)
-2147483647 W 2147483647
 Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C02754 | LI_dnActualThermalLoadDevice
Data type: INTEGER_32
Index: 21821
d
= 553D
h
From software version V2.0 onwards
Thermal device utilisation in [%]
• Current result of the Ixt calculation.
Display range
(min. value | unit | max. value)
0.00 % 200.00
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 100
Parameter | Name:
C02755 | LI_dnActualThermalLoadFilter
Data type: INTEGER_32
Index: 21820
d
= 553C
h
From software version V2.0 onwards
Thermal filter utilisation in [%]
Display range
(min. value | unit | max. value)
0.00 % 200.00
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 100