Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 185)

CHAPTER COLOR
COLOR 185
9
3D Display Modes
For Stereoscopic 3D projects, set the selection “Display Both Eyes for 3D” to see both eyes on the SDI
output. The format of the display can be selected from the various display types. Side-by-side, Line-by-
Line, Checkerboard Anaglyph B&W or Anaglyph Color, Difference or none.
To see these selections on the viewer and WFM check the option to apply the mesh display.
Stereoscopic 3D images are often produced out of sync and the ‘Increase and Decrease Source Clip
Timecode’ selections move the active clip one frame at a time to permit visual resyncing.
Color screen viewer with four playheads active