Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 82)

CONFIGURATION 82
Image Decode Settings
If you chose to modify the decoding parameters for your RED files by choosing the ‘Project’ option in
the Decode Clips Using setting, the following controls become active.
Color Science: The original REDone camera builds used a different color science to the
more recent builds. Select here as appropriate.
Color Space: Red offers a number of color space options when decoding the RAW images:
REDcolor, which is default color space; Camera RGB, which bypasses the matrix
in the camera and uses uncorrected sensor data; REDSpace, which extracts
a color space larger than REC.709, often used for film work; sRGB, which is a
color space used for monitors, printers and the Internet and REC.709, which is
the standard for HDTV.
Gamma Curve: The Gamma selections include: Linear , where no gamma adjustment is applied;
REC.709, which is the standard HDTV gamma; sRGB which has the REC.709
color space with slightly different gamma; REDSpace , which is a higher
contrast color space than REC.709; REDlog , which maps the native 12-bit RAW
image data into a standard 10-bit Log curve and Custom PDLog, which offers
users an alternative LOG curve, similar to Cineon, and also provides for custom
adjustments as described below. The
PDLog 685 and 985 offer alternative
white points for the gamma curve. The default is REDgamma, which is a log
gamma with a smooth highlight roll off.
OLPF Comp: The OLPF compensation sets a low pass filter to reduce color moiré. There
are four options with Off being the default.
Image Detail: Select from the low, medium or high sensor detail extraction options.
Denoise: There are seven settings from mild to maximum to adjust for the best noise
reduction without image degradation.
Image Decoder Settings