Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 360)

SCENE 360
The bottom half of the screen is dominated by the graph used to display the results of the Scene Cut
Detector’s analysis of the images. As the Scene Cut Detection process is taking place you will see a
visual graph forming. Once the process is completed, the scene changes are listed in the column to the
right of the Scene Cut Detector graph.
The horizontal green bar within the Scene Cut Detector graph represents the sensitivity level for the
detector. If you click and drag it upward, it will lower the sensitivity, and if you lower the bar, it will increase
the sensitivity. When either of these functions are performed, the calculations of where scene cuts occur
will immediately be updated on the cut list.
DaVinci Resolve enables you to adjust the sensitivity of the detection process even after the analysis
has been performed. This is a significant time save in reducing false positive selections and also permits
dynamic review of the cut list.
Scene Cut Detector Graph
Scene Graph