Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 305)

CHAPTER VIEWER
VIEWER 305
10
Interactive
The Interactive controls let you make manual changes to the automatically generated tracking
point cloud that Resolve creates, so you can try different ways of obtaining better tracking results in
challenging situations.
Enter Interactive/Exit Interactive:
Turns the Interactive tracking mode on and off. When you enter
Interactive mode, you can manually alter the point cloud that
Resolve uses to track the feature within the current window.
When you exit Interactive mode, your manual changes to the point
cloud are eliminated, and Resolve once again uses automatically
placed point clouds to do all tracking.
Insert: Lets you add tracking points to whatever trackable features exist
within a bounding box that you’ve drawn. Inserted tracking points
are automatically placed based on trackable pixel groups.
Delete: Eliminates all tracking points within a bounding box that
you’ve drawn.
Set Point: Lets you use the cursor using the DaVinci Resolve control surface,
to manually place individual tracking points, one by one, with
which to track a feature. If there is no trackable pixel group at the
coordinates where you placed the cursor, a tracking point will be
placed at the nearest trackable pixel group.
You must place at least two tracking points at different pixel
groups to track rotation, and at least three to track zoom.
Clear Point: Eliminates all tracking points from the clip.
For more information, see “Using the Interactive Tracking Controls” later in this section.
Controls in the Interactive group