Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 352)

REVIVAL 352
Marking clips for Revival restoration
Clips are marked for restoration using the DaVinci Resolve control panels or via the right click pull-down
list on the Color screen timeline thumbnail for the current clip. The options, as described in the Color
chapter of this guide, are to Add the Current Frame for Dirt Processing, Add the Selected Clips for Dirt
processing, or Add the Selected Clips for Grain Processing. As each selection is made, the request will
join the queue listed on the DaVinci Revival screen.
Selecting DaVinci Revival on the control panels will display the control panel soft keys, giving you the
options for marking the frame or scene just as the mouse selection does on the Color screen thumbnail.
Revival Grain Settings
On the Revival screen within the Grain Settings area, you may set and save recommended settings for
grain reduction. These can be recalled later, adjusted to suit the new image, and saved again.
When you select one of the clips marked for grain reduction, the Grain Settings will become active. They
display the current status of the user controls for grain reduction. You can use these as is, or adjust them.
You can also save the settings as a preset.
Each time you select the same clip, the settings will refresh to show the values for that clip. Use the
’Load’ button to apply other presets to one or many clips.
Resolve Timeline Thumbnail (right click selection for Revival restoration)
Revival Grain Settings