List marking – Blackmagic Design DaVinci Resolve Advanced Panel User Manual
Page 412
DAVINCI RESOLVE CONTROL SURFACE
412
List Marking
The List Marking keys are on the bottom right hand side of the Transport panel. The functions are
replicated on the Fader Bar panel. The List Marking group of keys is used in association with the timeline
and controls the selection of keyframe points for the start and end of dynamic transitions of the grade,
called Dynamics.
Delete:
This key deletes the Dynamic.
Start Dynamic:
This key is used to select the first keyframe in a transition, a Dynamic.
The transition may be a grade change, a sizing, the addition of a matte,
or any number of 100 variables all of which are associated with the
Node Graph and the clip or Track timeline.
Trim:
This key is used with the numerical keypad to trim a mark position.
Ripple Value:
If you have a grade, or effect, or just an adjustment and you would like
to ripple this effect over another or a large number of other clips, use
Ripple Value.
Mark:
Like the Start Dynamic key, Mark is a major key. It places a keyframe on
the clip timeline and between the Start Dynamic and Mark, or between
multiple Marks you can change the grade.
Scene (Shift Down Mark):
To quickly switch to the Scene Cut Detection screen select Shift
Down then Mark.
Lift Mark:
Often you may place a mark in the wrong spot so place your cursor
on the mark and use Lift Mark to remove it.