Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 68)

CONFIGURATION 68
From the LUTs tab on the Configuration screen you may select various Input, Output, or Display look-
up tables or LUTs. There is also an option to ‘Apply LUT to Waveform’, when checked, will apply the
selected LUT to the DaVinci Resolve Waveform display. This can be useful when working in Video
grading mode when a 3D LUT has been applied.
Timeline Lookup Tables
Within the Timeline Lookup Tables display are the factory preset lookup tables along with those that have
been generated or imported into DaVinci Resolve. If new lookup tables are imported into the system, the
Update lists button should be clicked to refresh the contents of the pull down menus. Resolve uses both
1D and 3D LUTs.
3D LUTs that are generated in DaVinci Resolve are in the .cube format and are configured as 33x33x33
cubes in 32 bit floating point. DaVinci Resolve can also read and use LUTs in the Cinespace format.
LUTs Tab
LUT Tab
LUT Table