Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 405)

CHAPTER DAVINCI RESOLVE CONTROL SURFACE
DAVINCI RESOLVE CONTROL SURFACE 405
19
On the right side there are three more controls, from top to bottom: Saturation, Hue (has the effect of
hue rotation), and Luminance Mix. Above the three left most trackballs you will see these three keys:
RGB: This key resets the RGB balance only to detent.
All: To reset both RGB and level.
Level: If you wish to reset the level while maintaining RGB differential.
Above the right most trackball the three keys are:
Adjust Window: Selection of this key brings up the shape cursors for the current node, and
allows the trackball to position the current window.
Modes: This key allows access to a number of menus and acts as an on/off toggle.
Shift Up Cursor: This shift function changes the cursor views on the main monitor. The user
can select the cursor display including windows on the GUI, but not the
main monitor, or both, as they prefer.
Cursor: The Cursor is used for the Color Picker when in Vector mode. This key also
controls the window display.
Under the left and right most trackballs there are three keys. Operation for the keys under the left-hand
side trackball is not yet implemented.
The keys under the right-hand side trackball provide left, center, and right mouse buttons. The right-
hand side trackball functions as a mouse when the left mouse button is selected, while not in Cursor
mode, and can also double as an Offset Control.