Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 403)

CHAPTER DAVINCI RESOLVE CONTROL SURFACE
DAVINCI RESOLVE CONTROL SURFACE 403
19
Reference Configuration
This area of the fader panel include six keys and the fader T-Bar. It is primarily used for control of stills
display with and without reference wipes. The fader bar controls the mix or wipe position when the
appropriate mode is active.
Key: This key is not yet implemented.
Circle: This key is not yet implemented.
Wipe: The Wipe key selects a wipe for reference comparison with the
current image.
H/V: This key toggles the wipe between horizontal and vertical.
Box: This key is not yet implemented.
Mix: To mix in preference to wipe select this key.
Still: The Still key permits comparison of the current clip with the
selected still.
Memory: Use this key to compare the current clip with a memory.
Hilite: When in the Vector menus making secondary qualifiers, it’s common
to select the Highlight key to show a high contrast separation of the
qualified color and all other parts of the image. Toggle this key to
turn off. Highlight is used so often it’s also on the fader panel and
when in vectors on the Trackball panel.
Mode(ShiftDownHighlight): Used to toggle the highlight mode from grey to high contrast.
Timeline: Select the Timeline key when you wish to compare the current to
the Timeline image.
Offline: Select the Offline key when you wish to compare the current to the
offline image.
Reference On/Off: This toggle key will turn the reference view on or off. When On you
can see the current clip in comparison to a reference.