Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 24)

SYSTEM SETUP 24
Video Capture Hardware
If you have a video capture and playback card, select it from the pulldown list. The options include
supported cards, so if you do not see your card on this list, it has either not been detected by DaVinci
Resolve or it is not currently supported.
Control Panel Type
Finally, select which control panel hardware you have connected to your DaVinci Resolve from the
list provided.
After you have made each of these selections select ‘Save’ and then restart the DaVinci Resolve
application.
You may have noticed a ‘Debug’ tab. This is used for engineering and is not required for general use.