Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 330)

FORMAT 330
All controls on the Input tab refer to the individual clip being adjusted, so the Clip tab is also automatically
selected to show the Dynamics Timeline for the current clip. Select another clip and the settings will
match the dynamics set for that clip. If you have no input adjustments (i.e., no Pan or Size or Rotation,
etc.), the controls will show no variation between clips. However, a simple Pan on the slider control, or
panels, will be displayed on the Input tab and also on the top right image of the Output image.
Input Transform
When you adjust the image format using the Input Transform controls, these changes may also be
programmed within the Clip tab of the Dynamic Timeline as Input Transform settings are all on a clip-
by-clip basis and are keyframable.
Presets
You can create and save custom sizing presets that can be selected and recalled on the Config screen
and also the Browse screen. These presets may be applied as global presets from the Configuration
screen or a Clip preset within the Media Pool. When the Clip tab is selected, the presets may also be
applied from within the Input tab on the Format screen or even by right mouse clicking on a thumbnail
within the Color or Format screens.
To create a Format preset, simply make a size change with the formatter and then click on the ‘Save As’
button. A window will open showing the values to be saved. Enter a name for your preset, and if you like,
trim any adjustments. ‘Save’ to close, close without saving, or select ’Default’ to reset the values. You will
then see in the Input Transform Presets list the new preset name.
You can edit or delete an existing preset by selecting the ‘Edit’ button and editing the popup.
Input
Input Format Tab
Input Format Preset Values