Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 232)

COLOR 232
Image Decoder Settings
Once you have selected the Clip option in the Master RED Decoder Settings, all parameters in the
Image Decoder become active.
Color Science: The original REDone camera builds used a different color science to the more
recent builds. Select here as appropriate.
Color Space: RED offers a number of different color space options when decoding the RAW
images:
REDcolor , which is default color space; Camera RGB , which bypasses
the matrix in the camera and uses uncorrected sensor data; REDSpace , which
extracts a color space larger than REC.709, often used for film work; sRGB ,
which is a color space used for monitors, printers and the Internet and REC.709,
which is the standard for HDTV.
Gamma Curve: The Gamma selections include: Linear , where no gamma adjustment is
applied; REC.709 , which is the standard HDTV gamma; sRGB , which is a color
space used for monitors, printers and the Internet; REDSpace , which is a higher
contrast color space than REC.709; REDlog , which maps the native 12-bit RAW
image data into a standard 10-bit Log curve, and Custom PDLog , which offers
users an alternative LOG curve, similar to Cineon, and also provides for custom
adjustments as described below. The
PDLog 685 and 985 offer alternative
white points for the Gamma Curve. The default is REDgamma.
OLPF Comp: The OLPF compensation sets a low-pass filter to reduce color moiré. There are
four options, with Off being the default.
Image Detail: Select from the low, medium, or high sensor detail extraction options.
Denoise: There are seven settings, from mild to maximum, to adjust for the best noise
reduction without image degradation.
Color screen Thumbnail Right Click to select Edit RED codec settings