Ground multiple subpanels – Rockwell Automation 2094-EN02D-M01-Sx Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual User Manual
Page 101
Rockwell Automation Publication 2094-UM002E-EN-P - May 2012
101
Connecting the Kinetix 6200 and Kinetix 6500 Drive System
Chapter 5
For mounting bracket dimensions, refer to the 2094 Mounting Brackets
Installation Instructions, publication
.
Ground Multiple Subpanels
In this figure, the chassis ground is extended to multiple subpanels.
Figure 53 - Subpanels Connected to a Single Ground Point
High-frequency (HF) bonding is not illustrated. For HF bonding information,
refer to Bonding Multiple Subpanels on
.
IMPORTANT
When 2094 mounting brackets are used to mount the power rail or LIM module
over the AC line filter, the braided ground strap must be removed from the
power rail and attached to a mounting bracket ground stud.
Follow NEC and applicable
local codes.
Bonded Ground Bus
Ground Grid or Power
Distribution Ground