Rockwell Automation 2094-EN02D-M01-Sx Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drives User Manual User Manual
Page 177
Advertising
Rockwell Automation Publication 2094-UM002E-EN-P - May 2012
177
Configure and Start the Kinetix 6500 Drive System
Chapter 7
11. Click the Associated Axes tab.
12. Click New Axis.
The New Tag dialog box opens.
13. Type the axis Name.
AXIS_CIP_DRIVE is the default Data Type.
14. Click OK.
The new axis (Axis_1) appears under Motion Groups>Ungrouped Axes in
the Controller Organizer and is assigned as Axis 1.
Advertising
This manual is related to the following products: