Delta RMC151 - Manual (Page 1045)

9 Register Reference
0.1-1.x)
2: B (RMC75S and RMC75P
2.x)
F7:22 3629 D03628 REAL %MD7.22 DINT Flash Rev
Major * 256 + Minor
F7:23 3631 D03630 REAL %MD7.23 DINT Required RMCTools Ver
Major * 256 + Minor (patch
ignored)
F7:24 3633 D03632 REAL %MD7.24 DINT Suggested RMCTools Ver
Major * 256 + Minor (patch
ignored)
F7:25 3635 D03634 REAL %MD7.25 DINT Loader Rev
Major * 256 + Minor
F7:26 3637 D03636 REAL %MD7.26 DINT Loader Year and Month
Year (4-digit) * 16 + Month
(1=Jan, 2=Feb, ...)
F7:27 3639 D03638 REAL %MD7.27 DINT Loader Day and Time
Date (1-31) * 2048 + Hour (0-
23) * 64 + Minute
F7:28 3641 D03640 REAL %MD7.28 DINT Loader Command
For sending certain commands
to the loader, such as restart
the RMC. See Loader
Command for more details.
F7:29 3643 D03642 REAL %MD7.29 DINT Reason in Loader
0: Not in Loader
1: Explicitly Requested by
Firmware (e.g. Firmware
Update)
2: Bad FW Image Checksum
3: Invalidate FW Image Header
4: Base Module not supported
by FW Image
5: Axis Module not supported
by FW Image
6: Watchdog Timeout
7: Boot of FW Image Failed
8: FPGA Configuration Failed
9: Force-to-Loader Jumper is
set
10: Unexpected External Reset
F7:30 3645 D03644 REAL %MD7.30 DINT Loader State
Only used when updating.
Confidential
F7:31 3647 D03646 REAL %MD7.31 DINT CPU Board Version
This indicates the actual CPU
board revision.
Bits 0-7: Mod Level (0=A,
deltamotion.com 1025