Delta RMC151 - Manual (Page 1091)

9 Register Reference
plot.
F31:5 15883 D15882 - %MD31.5 UDINT - Reserved
F31:6 15885 D15884 - %MD31.6 UDINT - Reserved
F31:7 15887 D15886 - %MD31.7 UDINT - Reserved
RMC70 Registers, Files 32-39: Plot Configuration Registers
The following files contain the Plot Configuration registers. See the Reading Plots with a Host
Controller topic for details on how some of them can be used.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Access Register Name
Plot 0
F32:0
16385 D16384 REAL %MD32.0 UDINT not
directly
Plot Flags
These bits should
not be accessed
directly.
0 Reserved (Write
Only)
1 Trigger (Write
only)
2 Rearm (Write
Only)
3 Read Active
(Read Only)
4 Trigger Enabled
(Read Only)
F32:1 16387 D16386 REAL %MD32.1 UDINT Read/Write Plot Samples (e.g.
1000)
F32:2 16389 D16388 REAL %MD32.2 REAL Read/Write Plot Sample Period
(seconds)
F32:3 16391 D16390 REAL %MD32.3 DINT Read/Write Plot Axis Owner
0-3, -1 = none
F32:4 16393 D16392 REAL %MD32.4 REAL Read/Write Plot Trigger Position
%, 0-100, -1 =
auto rearm
F32:5 16395 D16394 REAL %MD32.5 UDINT Read/Write Plot Trigger Type
0-
7
Trigger Type
(0=none,
1=motion
command)
8-
23
Depends on
trigger type
Motion
Commands:
8-
11
Axis 0-3 bits,
if all zero,
deltamotion.com 1071