Delta RMC151 - Manual (Page 1132)

RMC70/150 and RMCTools User Manual
The variables can given a user-defined tag name in the Variable Table Editor, which is the
preferred method of referencing variables from within RMCTools. The user-defined
variable name references the variable's Current Value.
Otherwise, each variable has a tag name as follows:
_VarTbl.CurVal[n] - Current Value of variable n.
_VarTbl.Initial[n] - Initial value of variable n.
RMC150 Registers, File 94: Image Area
See the Controller Image Upload/Download topic for details.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading registers with
DWORD or DINT external data types.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address External
Data Type
Internal
IEC
Address
Internal
Data Type Access
Register
Name
F94:0 48129 E0_15360 DINT %MD94.0 DINT Write Only Image Area
Command
F94:1 48131 E0_15362 DINT %MD94.1 DINT Read Only Image Area
State
F94:2 48133 E0_15364 DINT %MD94.2 DINT Read Only Image Size
F94:3 48135 E0_15366 DINT %MD94.3 DINT Read/Write Current
Index
F94:4
:
F94:4095 48137-
48639
(252
items)
E0_15368
-
E0_15870
(252
items)
DINT[252]
or
DINT[4092] %MD94.4
:
%MD94.4095 DINT[252]
or
DINT[4092] Read/Write Image Data
RMC150 Registers, File 95: Plot Layout
The following files contain the Plot Layout registers.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading data of DWORD or
DINT external data types.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Access Register Name
F95:0 48641 E0_15872 REAL %MD95.0 UDINT Read/Write Current Plot Layout
This register
indicates the current
plot allocation.
Bit Description
0-7 Plots (1-8)
8- Sample Sets per
1112 Delta Computer Systems, Inc.