Delta RMC151 - Manual (Page 1089)

9 Register Reference
Only
F26:9 13331 D13330 REAL %MD26.9 REAL Read
Only
Analog Input 9
Usage Notes
Viewing the Analog Voltage
To view the Analog Input values in RMCTools, enter the address of the input in the Map
To column in the Indirect Data Map. The analog input value will appear in the Current
column of the Indirect Data Map.
Uses
These registers can be used for plotting, can be used in expressions, and can be read by
an external device such as a PLC. They can also be used as a gear Master Register, just
like any other REAL register, but notice that no filtering or advanced rate calculations will
be provided. Also, because the input cannot be part of a halt group, the safety of using
the input for gearing must be evaluated by the integrator.
Tag Names
The analog inputs can be referenced with the tag names _AI[i], where i is the input
number. For example analog input 3 is _AI[3].
RMC70 Registers, File 30: Image Area
See the Controller Image Upload/Download topic for details.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading registers with
DWORD or DINT external data types.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address External
Data Type
Internal
IEC
Address
Internal
Data Type Access
Register
Name
F30:0 15361 D15360 DINT %MD30.0 DINT Write Only Image Area
Command
F30:1 15363 D15362 DINT %MD30.1 DINT Read Only Image Area
State
F30:2 15365 D15364 DINT %MD30.2 DINT Read Only Image Size
F30:3 15367 D15366 DINT %MD30.3 DINT Read/Write Current
Index
F30:4
:
F30:4095 15369-
15871
(252
items)
D15368-
D15870
(252
items)
DINT[252]
or
DINT[4092] %MD30.4
:
%MD30.4095 DINT[252]
or
DINT[4092] Read/Write Image Data
RMC70 Registers, File 31: Plot Layout
The following files contain the Plot Layout registers.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading data of DWORD or
DINT external data types.
deltamotion.com 1069