Delta RMC151 - Manual (Page 1110)

RMC70/150 and RMCTools User Manual
95 Plot Layout
96-103 Plots 0-7 Status/Configuration
104-111 Dynamic Plot Upload Area
112-143 Static Plot Upload Area
144-149 Slot Settings
RMC150 Registers, File 7: Controller Info
All Controller Information registers are Read Only.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading registers with
DWORD or DINT external data types.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Register Name
F7:0 3585 D03584 REAL %MD7.0 DINT Product ID
2: RMC150 series
F7:1 3587 D03586 REAL %MD7.1 DINT State
1: Running Control Program
2: Running Control Program (in
debugger)
3: Running Loader
F7:2 3589 D03588 REAL %MD7.2 DINT CPU Module ID (slot 1)
16: RMC150E
17: RMC151E
F7:3 3591 D03590 REAL %MD7.3 DINT CPU Module Rev (slot 1)
Major * 256 + Minor
F7:4 3593 D03592 REAL %MD7.4 DINT Comm Module ID (slot 0)
0: Blank
38: Serial (not supported)
40: DI/O
41: PROFIBUS
42: ENET (not supported)
43: Modbus Plus (not
supported)
45: Universal I/O
F7:5 3595 D03594 REAL %MD7.5 DINT Comm Module Rev (slot 0)
Major * 256 + Minor
F7:6 3597 D03596 REAL %MD7.6 DINT Sensor Slot 1 Module ID (slot
2)
0: None
64: MDT (M)
66: Analog (H)
68: Analog Inputs (A)
1090 Delta Computer Systems, Inc.