Delta RMC151 - Manual (Page 1107)

9 Register Reference
Uploaded
F45:5-255 23051-
23551
D23050
D23550 * %MD45.5-
255
* Read Only Plot Data
Plot 6
F46:0
23553 D23552 DINT %MD46.0 UDINT Read/Write Plot Flags
F46:1 23555 D23554 DINT %MD46.1 UDINT Read/Write Plot Requested
Read Samples
F46:2 23557 D23556 DINT %MD46.2 UDINT Read/Write Plot Current Index
F46:3 23559 D23558 DINT %MD46.3 UDINT Read Only Plot Plot ID
F46:4 23561 D23560 DINT %MD46.4 UDINT Read Only Plot Samples
Uploaded
F46:5-255 23563-
24063
D23562-
D24062 * %MD46.5-
255
* Read Only Plot Data
Plot 7
F47:0
24065 D24064 DINT %MD47.0 UDINT Read/Write Plot Flags
F47:1 24067 D24066 DINT %MD47.1 UDINT Read/Write Plot Requested
Read Samples
F47:2 24069 D24068 DINT %MD47.2 UDINT Read/Write Plot Current Index
F47:3 24071 D24070 DINT %MD47.3 UDINT Read Only Plot Plot ID
F47:4 24073 D24072 DINT %MD47.4 UDINT Read Only Plot Samples
Uploaded
F47:5-255 24075-
24575
D24074-
D24574 * %MD47.5-
255
* Read Only Plot Data
*The Data Types of the Plot Data are determined by the plotted registers.
RMC70 Registers, Files 48-55: Static Plot Upload Area Registers
All Static Plot Upload Area Registers are Read Only. See the Reading Plots with a Host
Controller topic for details on how to use them.
The data types of the plot data is determined by the plotted registers.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading plot data of DWORD
or DINT data types.
Note:
When communicating via a protocol that uses DF1 addressing, samples 0-4095 from each plot
can be addressed, if the host controller allows it. For example, F112:4095 addresses sample
4095 of plot 0, sample set 0.
Other protocols can only address the first 256 samples, as indicated below.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
Internal
IEC
Address Register Name
Plot 0
F48:0-255 24577-25087 D24576-D25086 %MD48.0-255 Plot 0, Sample Set 0, Samples 0-
255
deltamotion.com 1087