Delta RMC151 - Manual (Page 1129)

9 Register Reference
characters of the
PROFINET device
name.
F45:116 23273 D23272 DWORD %MD45.116 DWORD Read/Write PROFINET Custom
Data Record 1000
Address
F45:117 23275 D23274 DWORD %MD45.117 DWORD Read/Write PROFINET Custom
Data Record 1001
Address
F45:118 23277 D23276 DWORD %MD45.118 DWORD Read/Write PROFINET Custom
Data Record 1002
Address
F45:119 23279 D23278 DWORD %MD45.119 DWORD Read/Write PROFINET Custom
Data Record 1003
Address
RMC150 Registers, File 46: Event Log Configuration
This file is used by RMCTools to configure Event Log filtering. It should not be edited directly.
Instead use the Event Log Properties to change these settings from within RMCTools.
RMC150 Registers, File 47: Discrete I/O
All Discrete I/O registers are Read/Write.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading registers with
DWORD or DINT external data types.
n = RMC slot (0-5)
b = 2 x n
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Tag Name
Register
Name
F47:0+n 24065 +
b
D24064
+ b
DWORD %MD47.0+n DWORD _DIO.OutState[n] Outputs for
Slot n
F47:6+n 24077 +
b
D24076
+ b
DWORD %MD47.6+n DWORD _DIO.InState[n] Inputs for
Slot n
F47:12+n 24089 +
b
D24088
+ b
DWORD %MD47.12+n DWORD _DIO.OffInProgram[n] Output to
Off in
PROGRAM
mode for
slot n
F47:18+n 24101 +
b
D24100
+ b
DWORD %MD47.18+n DWORD _DIO.OnInProgram[n] Output to
On in
PROGRAM
mode for
slot n
F47:24+n 24113 + D24112 DWORD %MD47.24+n DWORD _DIO.OffInFault[n] Output to
deltamotion.com 1109