Delta RMC151 - Manual (Page 1133)

9 Register Reference
15 Plot (1-16)
16-
23
Reserved
F95:1 48643 E0_15874 REAL %MD95.1 UDINT Read Only Maximum Plots (8)
This read-only value
indicates how many
plots can be defined
at once.
F95:2 48645 E0_15876 REAL %MD95.2 UDINT Read Only Maximum Samples
(16)
This read-only value
indicates how many
samples sets can be
captured
simultaneously per
plot.
F95:3 48647 E0_15878 REAL %MD95.3 UDINT Read Only Maximum Samples at
Once (128)
This read-only value
indicates how many
total different
samples can be
allocated across all
plots.
F95:4 48649 E0_15880 REAL %MD95.4 UDINT Read Only Maximum Elements
(12,582,912)
This read-only value
indicates how many
total data points can
be captured. This is
spread out among
the number of
allocated plots and
samples per plot.
F95:5 48651 E0_15882 - %MD95.5 UDINT - Reserved
F95:6 48653 E0_15884 - %MD95.6 UDINT - Reserved
F95:7 48655 E0_15886 - %MD95.7 UDINT - Reserved
RMC150 Registers, Files 96-103: Plot Configuration Registers
The following files contain the Plot Configuration registers. See the Reading Plots with a Host
Controller topic for details on how some of them can be used.
n = plot # (0-7)
f = 96 + n
b = 512 x n
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Access Register Name
Plot n
Ff:0
49153 + E0_16384 REAL %MDf.0 UDINT not Plot Flags
deltamotion.com 1113