Delta RMC151 - Manual (Page 1172)

RMC70/150 and RMCTools User Manual
12 Control Output Drv: blue/white
13 Control Output Common Drv: white/blue
14 Z- Index from encoder (5 V) Enc: white/green
15 Z+ Index from encoder (5 V) Enc: green/white
16 Encoder Common Enc: white/brown
Enc: brown/white
17 No connection
18 Home Input - (5-24 VDC) Lim: white/green
19 Home Input + (5-24 VDC) Lim: green/white
20 Fault Input - (5-24 VDC) Drv: white/green
21 Fault Input + (5-24 VDC) Drv: green/white
22 No connection
23 No connection
24 Enable Output
Drv: white/orange
25 Drv: orange/white
Note:
The example schematics do not include transducer pin numbers, color codes, or power supply
requirements, since these vary between different transducers. To determine your power
supply needs and connector pin-outs or cable color codes, consult your transducer
manufacturer's documentation.
Note:
The Quadrature input Cmn pin must be connected! A disconnected Cmn pin can cause noise
and inaccurate readings.
1152 Delta Computer Systems, Inc.