Delta RMC151 - Manual (Page 1104)

RMC70/150 and RMCTools User Manual
0-3, -1 = none
F39:4 19977 D19976 REAL %MD39.4 REAL Read/Write Plot Trigger Position
%, 0-100, -1 =
auto rearm
F39:5 19979 D19978 REAL %MD39.5 UDINT Read/Write Plot Trigger Type
0-
7
Trigger Type
(0=none,
1=motion
command)
8-
23
Depends on
trigger type
Motion
Commands:
8-
11
Axis 0-3 bits,
if all zero,
then use
Axis Owner
12-
23
Reserved
F39:6 19981 D19980 REAL %MD39.6 - - Reserved
F39:7 19983 D19982 REAL %MD39.7 - - Reserved
F39:8 19985 D19984 REAL %MD39.8 REAL Read Only Plot ID
F39:9 19987 D19986 REAL %MD39.9 REAL Read Only Plot State
0 = not triggered, 1
= capturing, 2 =
complete
F39:10 19989 D19988 REAL %MD39.10 DINT Read Only Plot Captured
Samples
Number of plot
samples captured.
Only applies for Plot
State > 0.
F39:11 19991 D19990 REAL %MD39.11 DINT Read Only Plot Sample 0 Time
Time that first plot
sample was
captured. In control
loops since
controller startup
(low 24 bits). Only
applies for Plot
State > 0.
F39:12 19993 D19992 REAL %MD39.12 DINT Read Only Plot Trigger Time
Time that plot
trigger occurred. In
control loops since
controller startup
(low 24 bits). Only
applies for Plot
State > 0.
1084 Delta Computer Systems, Inc.