Delta RMC151 - Manual (Page 1080)

RMC70/150 and RMCTools User Manual
Entry 15
F17:16 8737 D08736 REAL %MD17.16 DINT Read/Write Indirect Data Map
Entry 16
F17:17 8739 D08738 REAL %MD17.17 DINT Read/Write Indirect Data Map
Entry 17
F17:18 8741 D08740 REAL %MD17.18 DINT Read/Write Indirect Data Map
Entry 18
F17:19 8743 D08742 REAL %MD17.19 DINT Read/Write Indirect Data Map
Entry 19
F17:20 8745 D08744 REAL %MD17.20 DINT Read/Write Indirect Data Map
Entry 20
F17:21 8747 D08746 REAL %MD17.21 DINT Read/Write Indirect Data Map
Entry 21
F17:22 8749 D08748 REAL %MD17.22 DINT Read/Write Indirect Data Map
Entry 22
F17:23 8751 D08750 REAL %MD17.23 DINT Read/Write Indirect Data Map
Entry 23
F17:24 8753 D08752 REAL %MD17.24 DINT Read/Write Indirect Data Map
Entry 24
F17:25 8755 D08754 REAL %MD17.25 DINT Read/Write Indirect Data Map
Entry 25
F17:26 8757 D08756 REAL %MD17.26 DINT Read/Write Indirect Data Map
Entry 26
F17:27 8759 D08758 REAL %MD17.27 DINT Read/Write Indirect Data Map
Entry 27
F17:28 8761 D08760 REAL %MD17.28 DINT Read/Write Indirect Data Map
Entry 28
F17:29 8763 D08762 REAL %MD17.29 DINT Read/Write Indirect Data Map
Entry 29
F17:30 8765 D08764 REAL %MD17.30 DINT Read/Write Indirect Data Map
Entry 30
F17:31 8767 D08766 REAL %MD17.31 DINT Read/Write Indirect Data Map
Entry 31
*The Access and Data Types of the Indirect Data Values registers are determined by the
mapped registers.
RMC70 Registers, File 19: Axis Definitions
The Axis Definitions are not intended to be directly accessed by the user. The preferred
method of changing the axis definitions is to use the Axis Definitions dialog.
For highly advanced users, see the Axis Definition Registers topic for more details.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Register Name
F19:0-15 9729-
9759
D09728-
D09758 DWORD %MD19.0-15 DWORD Current Axis Definitions
(Read-Only)
F19:16- 9761- D09760- DWORD %MD19.16- DWORD Requested
1060 Delta Computer Systems, Inc.