Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 101)

Brocade Network Advisor SAN + IP User Manual 31
53-1003155-01
SAN feature-to-firmware requirements
1
Port Fencing (Trial and Licensed version
Only) Requires Fabric OS 6.2 or later.
Requires Fabric OS 6.3 or later for State Change and C3 Discard Frames violation types.
Security Management Requires Fabric OS 5.2 and later for SCC Policy.
Requires Fabric OS 5.2 and later for DCC Policy.
Requires Fabric OS 5.3 and later for IP Filter Policy.
Requires Fabric OS 6.0 and later for AD/LDAP Server Configuration.
Requires Fabric OS 5.0 and later for RADIUS Server Configuration.
Technical Support Data Collection Requires Fabric OS 5.2 or later.
Troubleshooting and Diagnostics Requires Fabric OS 5.2 or later.
Virtual Fabrics (Trial and Licensed version
Only) Requires at least one Virtual Fabrics-enabled physical chassis running Fabric OS 6.2 or later.
Zoning Requires Fabric OS 5.0 or later for pure Fabric OS fabrics.
Requires Fabric OS 6.0 or later for McDATA Fabric Mode.
Requires Adaptive Networking license for Quality of Service zones.
TABLE 10 SAN feature to firmware requirements
Feature Fabric OS