Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2297)

Brocade Network Advisor SAN + IP User Manual 2225
53-1003155-01
CLI Templates
G
TABLE 27 IronWare OS – Configure L2-Access-List
Feature Description CLI Commands
ACL Configure L2 access list for IronWare
products. access-list $<aclNumber|INTEGER> deny $<srcmac|MAC>
$<srcmask|MAC> any
access-list $<aclNumber|INTEGER> deny any
$<destmac|MAC> $<destMask|MAC>
access-list $<aclNumber|INTEGER> permit
$<sourcemac2|MAC> $<sourcemask2|MAC> any
access-list $<aclNumber|INTEGER> permit any any
no access-list $<aclNumber|INTEGER> permit any any
no access-list $<aclNumber|INTEGER> permit
$<sourcemac2|MAC> $<sourcemask2|MAC> any
TABLE 28 MCT Cluster Creation
Feature Description CLI Commands
MCT Create a session VLAN. vlan $<SESSION_VLAN|INTEGER> name Session-VLAN
tagged ethernet $<SESSION_VLAN_PORT|SLOT_PORT>
router-interface ve $<SESSION_VE_INTERFACE|INTEGER>
interface ve $<SESSION_VE_INTERFACE|INTEGER>
ip address $<SESSION_VE_INTERFACE_IP|STRING>
MCT Create a keep–alive VLAN. vlan $<KEEP_ALIVE_VLAN|INTEGER> name MCT-keep-alive
tagged ethernet $<KEEP_ALIVE_VLAN_PORT|SLOT_PORT>
MCT Create cluster configuration. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
rbridge-id $<RBRIDGE_ID|INTEGER>
session-vlan $<SESSION_VLAN|INTEGER>
keep-alive-vlan $<KEEP_ALIVE_VLAN|INTEGER>
icl $<ICL_NAME|STRING> ethernet $<ICL_PORT|SLOT_PORT>
peer $<PEER_SESSION_VE_INTERFACE_IP|STRING>
rbridge-id $<PEER_RBRIDGE_ID|INTEGER>
icl $<ICL_NAME|STRING>
MCT Specify single VLAN ID or range
<DECIMAL> [to <DECIMAL>]. member-vlan $<MEMBER_VLANS|STRING>
NOTE: ICL ports should also be added to MCT Member VLANs.
TABLE 29 MCT Cluster Deployment
Feature Description CLI Commands
MCT Deploy cluster. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
deploy
TABLE 30 MCT Cluster Undeployment
Feature Description CLI Commands
MCT Undeploy cluster. cluster $<CLUSTER_NAME|STRING> $<CLUSTER_ID|INTEGER>
undeploy