Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 449)

Brocade Network Advisor SAN + IP User Manual 377
53-1003155-01
Dashboard overview
8
The objects display in the Selected Targets list.
6. To remove an object from the Selected Targets list, select it and click the left arrow button.
7. Click OK to save your changes and close the Edit Scopes dialog box.
Deleting a user-defined network scope
You can delete any user-defined network scope.
1. Click the Scope list.
2. Click Manage Network Scopes.
The Edit Scopes dialog box displays with a list of existing user-defined network scopes in the
Network Scopes list.
3. Select the network you want to delete in the Network Scopes list.
4. Remove all objects from the Selected Targets list.
To remove an object from the Selected Targets list, select it and click the left arrow button.
5. Click Delete.
6. Click OK to save your changes and close the Edit Scopes dialog box.
Setting the time scope
Setting the time scope in the Scope list (configures and displays data for all applicable widgets in
the dashboard. The global duration allows you to select a specific time range as shown in the
following list:
• 30 Minutes — Displays data for 30 minutes.
• 1 Hour — Displays data for 1 hour.
• 6 Hours — Displays data for 6 hours.
• 12 Hours — Displays data for 12 hours.
• 1 Day — Displays data for 24 hours.
• 3 Days — Displays data for 3 days.
• 1 Week — Displays data for 1 week.
• 1 Month — Displays data for 30 days.
The time scope allows you to select the end time and duration in the last 30 days from the current
time.
To set the time scope, select any one of the following options under End time:
• Stay current — Displays data for the current time based on the selected network scope and
duration.
• Historical — Displays data for a specific date and time based on the selected network scope
and duration. The Historical option displays a calender with a 30-day timeline. The end date in
the calendar is the current date and the calendar will show the last 30 days from the current
date. You select a specific date in the last 30 days from current date, for which you want to
display data. When you select the Historical option, a message bar (
Figure 161 ) displays.