Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1933)

Brocade Network Advisor SAN + IP User Manual 1861
53-1003155-01
Viewing PoE performance
46
5. Click the Data Monitoring tab to view a performance monitoring graph or table.
• Click the Graph option to view a performance graph.
The legend under the graph shows what data each color represents. To configure graph
options, refer to
“Configuring the performance graph” on page 1656.
• Click the Table option to view a performance table.
The first column displays the time of the collection. The remaining columns display the
value of each collectible at the specified time. There is one column for every collectible you
selected to display.
6. Click the Collection Status Summary tab to view the following information:
The Collection Status Summary tab provides a high level overview of all defined collectors. The
information is displayed in the following columns:
• Product - Shows the product name and IP address. There maybe multiple instances of the
product name for each collectible assigned to the product.
• Port - The port name when a port is selected.
• Collectible - The MIB objects and expressions used by the data collector.
• Status - The status field uses the following icons.
• Last Value - The last (most current) value collected.
• Last Time Polled - The time that the collector was last polled.
7. Click Select Sources to add product and ports to or remove product and ports from real time
power performance monitoring. Refer to “Adding products and ports to real-time performance”
on page 1652 and “Removing products and ports from real-time performance” on page 1652.
8. Click Close to close the dialog box.
Failed. No value was ever collected for this collectible.
Warning: Data collection failed in the last polling cycle.
Successful: Last collection successful.
Scheduled but not currently active.