Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 318
246
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Areas of responsibility
6
The Add AOR, Edit AOR, or Duplicate AOR dialog box displays.
3. Click the Fabrics tab.
4. Select the fabrics you want to assign to the AOR in the Available Fabrics table and click the
right arrow button to move the products to the Selected Products table.
Select multiple fabrics by holding down the CTRL key and clicking more than one fabric.
5. Click the Hosts tab.
6. Select the hosts you want to assign to the AOR in the Available Hosts table and click the right
arrow button to move the products to the Selected Products table.
Select multiple hosts by holding down the CTRL key and clicking more than one host.
7. Click the IP Products tab.
8. Choose one of the following options:
•
Select the IP products you want to assign to the AOR in the Available IP Products table and
click the right arrow button to move the products to the Selected Products table.
Select multiple products by holding down the CTRL key and clicking more than one
product.
•
Select the System Product Group or User-Defined Device Group you want to assign to the
AOR in the Available IP Products table and click the right arrow button to move the groups
to the Selected Products table.
All products in the group will be assigned to the AOR.
•
(Application products (ServerIron) only) Select the Application_Product Group you want to
assign to the AOR in the Available IP Products table and click the right arrow button to
move the group to the Selected Products table.
Select multiple products by holding down the CTRL key and clicking more than one
product.
NOTE
You must include the Application product to which the real or virtual servers in the AOR for
the complete association to display in VIP manager.
NOTE
Virtual or real server IP addresses, configured for an Application product, display as a two
FLAT list under the associated Application product tree node in the Available IP Products
table.
9. Click OK to save your work
10. Click Close to close the Users dialog box.