Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1880)

1808 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Predefined flow definition templates
44
4. Click OK to deploy the flow definition.
The Deployment Status dialog box displays with a list of all defined flows in the Flow Definitions
Status table, as shown is
Figure 809 . Refer to Table 160 for the data displayed in the Flow
Definitions Status table.
FIGURE 812 Deployment Status dialog box
5. Click Start to deploy the flow definitions.
6. View additional details for a deployed flow definition by selecting the flow defintion in the Flow
Definitions Status table.
The reason for sucess or failure displays in the Details area.
To review the sub-flow data for the selected flow, refer to “Monitoring flows” on page 1733".
Configuring Aggregated Flow template
The Aggregated Flow predefined template creates flow rows for all the ports in the storage array
with the source device and empty destination device details as shown in
Figure 813 .