Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 920

Advertising
background image

848

Brocade Network Advisor SAN + IP User Manual

53-1003155-01

Network OS switches in VCS mode

20

Viewing QoS parameters on the Network OS switch LAG

Table 103

(DCB) and

Table 104

(non-DCB) describe the parameters that displays on the View LAG

dialog box - QoS tab.

NOTE

Network OS switches in VCS mode support only the DCB map. Network OS switches in standalone
mode supports both the DCB and Traffic Class maps.

QoS-DCB

Status

Indicates whether the LAG is enabled or disabled. You must enable the
LAG to use the DCB functionality.

Default CoS

The Cost of Service (CoS) value for incoming untagged frames. Values
are 0-7 or <profile> if the port is profiled. The default CoS is 0.

Type

Displays the limit on the size of the LAG. The type values include
Standard, where the LAG is limited to 16 ports, and Brocade LAG, where
the LAG is limited to 8 ports. The default is Standard.

MTU

The maximum transmission unit (MTU). Valid values are from 1522
through 9216 bytes, and the default is 2500 bytes.

Mode

Displays how the ports are added to the LAG members table in either
Static or Dynamic mode. The default is Dynamic, Active, but LAG
members can be Active or Passive if the LAG member is Dynamic.

Minimum Links

Displays the minimum number of operationally UP links needed to
declare the port channel UP. This field is applicable only for standalone
Network OS devices.

LAG Members list

Lists the ports that are members of the LAG.

TABLE 103

QoS (DCB) parameters on the Network OS switch LAG.

Field/Component

Description

Mode

The QoS mode (DCB).

Fabric Remap Priority

The fabric remap priority of the LAG. Valid values are CoS 0 through CoS
6, and the default is CoS 0.

DCB Map

The DCB map that is associated with the FCoE Map. This is a read-only
field.

Lossless Remap Priority

The FCoE lossless remap priority of the LAG. Valid values are CoS 0
through CoS 6, and the default is CoS 0.

TABLE 102

LAG parameters on the Network OS switch LAG (Continued)

Field/Component

Description

Advertising