Adding ag port fawwns, Deleting ag port fawwns, Moving an ag port fawwn across switches – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 857
Brocade Network Advisor SAN + IP User Manual
785
53-1003155-01
Adapter port WWN virtualization
19
Adding AG port FAWWNs
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Click the Attached AG Ports tab.
3. Select a row in the Fabric Assigned WWN Configuration - AG Ports list.
4. Click Add.
The Add AG Fabric Assigned WWN Configuration dialog box displays.
5. Enter a valid world wide name (WWN), with or without colons, for the Access Gateway node.
Optionally, you can select an existing AG Node WWN from the list. The AG Node WWN box
includes all discovered AG Node WWNs that are connected to the selected switch.
6. Enter a port or a port range using numbers or a hyphen (-). For example, you can enter a range
as 1-6 or you can separate values with a comma; for example: 1, 2, 5, 7-10, 20.
7. Click the Enable button to enable the FAWWN.
8. Set the FAWWN type to one of the following map types:
•
Auto — If the switch port does not have an Auto FAWWN map type and the FAWWN feature
is not yet enabled on the port, a <To Be Generated> message displays.
•
User defined — If this option is selected, you must enter a valid world wide name, with or
without colons. The User defined text box cannot be empty.
9. Click OK to add the rows for this configuration to the Fabric Assigned WWN Configuration - AG
Ports list.
Deleting AG port FAWWNs
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Click the Attached AG Ports tab.
3. Select an online AG FAWWN row and click the Delete button.
The AG FAWWN row is cleared from the Fabric Assigned WWN Configuration - AG Ports list.
Moving an AG port FAWWN across switches
The AG port FAWWN can be online or offline when moved across switches.
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.