Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2237)

Brocade Network Advisor SAN + IP User Manual 2165
53-1003155-01
About user privileges
D
IP - Element Manager -
Port Config Allows you to access the
device from Element
Manager. For read-write
access to a device Web
Management Interface to
manage specific ports,
but not for global
configuration of a device. Disables the Element
Manager - Port Config
command. Enables the Element
Manager - Port Config
command; however,
disables functions on the
dialog box. Enables the Element
Manager - Port Config
command and all
functions on the dialog
box.
IP - GSLB Manager Allows you to create GSLB
policies for Application
products. Disables the GSLB
command. Enables the GSLB
command; however,
disables functions on the
dialog box. Enables the GSLB
command and all
functions on the dialog
box.
IP - L3 ACL Allows you to configure a
layer 3 access control list. Disables the Security >
L3 ACL command on the
Configure menu. Enables the Security > L3
ACL command on the
Configure menu.
Disables all functions on
the dialog box. Enables the Security > L3
ACL command on the
Configure menu.
Enables all functions on
the dialog box.
IP - MAC Filter Allows you to configure a
media access control
filter. Disables the Security >
MAC Filter command on
the Configure menu. Enables the Security >
MAC Filter command on
the Configure menu.
Disables all functions on
the dialog box. Enables the Security >
MAC Filter command on
the Configure menu.
Enables all functions on
the dialog box.
IP - Main Display -
Ethernet Fabric Allows you to display the
topology for the Ethernet
Fabric network view. Disables the Ethernet
Fabric topology. Enables the Ethernet
Fabric topology; however,
disables functions on the
topology. Enables the Ethernet
Fabric topology and all
functions on the topology.
IP - Main Display - IP Allows you to display the
topology for the IP
network view. Disables the IP topology. Enables the IP topology;
however, disables
functions on the topology. Enables the IP topology
and all functions on the
topology.
IP - Main Display - L2 Allows you to display the
topology map for Layer 2.
The Layer 2 Topology map
displays connectivity for
all IOS devices on the
network. Disables the L2 topology. Enables the L2 topology;
however, disables
functions on the topology. Enables the L2 topology
and all functions on the
topology
IP - Main Display - MRP Allows you to display the
topology for MRP rings. Disables the MRP
Topology command. Enables the MRP
Topology command;
however, disables
functions on the topology. Enables the MRP
Topology command and
all functions on the
topology.
IP - Main Display - VLAN Allows you to display
topologies for VLANs. Disables the VLAN
topology. Enables the VLAN
topology; however,
disables functions on the
topology. Enables the VLAN
topology and all functions
on the topology.
IP - MPLS - VCID Pool Allows you to create a
pool of VCIDs which are
used when creating new
VLL and VPLS instances. Disables the MPLS
command. Enables the MPLS
command; however,
disables functions on the
dialog box. Enables the MPLS
command and all VCID
Pool functions on the
dialog box.
TABLE 219 IP privileges and behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write