Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 576)

504 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN view management overview
9
7. Confirm that all the fabrics and hosts you selected display in the Selected Fabrics and Hosts
table.
The Selected Fabrics and Hosts table displays the name, type (host or fabric), number of
products in the selected host or fabric.
8. Click OK to save your changes and close the Edit View dialog box.
9. Verify your changes on the main window of the Management application.
Deleting a customized view
To delete a customized view, use the following procedure.
1. Select View > Manage View > Delete View > View_Name.
2. Click Yes on the message.
If you delete the current view, the view changes to the default view (View All).
Copying a view
To copy a customized view, use the following procedure.
1. Use one of the following methods to open the Copy View dialog box:
• Select View > Manage View > Copy View > View_Name.
• Select Copy View from the View All list. The View All list does not display until you discover a
fabric or host.
The Copy View dialog box displays the name of the view you are copying.
FIGURE 224 Copy View dialog box
2. Enter a name (128-character maximum) in the Name field and a description (126-character
maximum) in the Description field for the view.
NOTE
You cannot use the name “View” or “View All” in the Name field.
NOTE
You cannot use an existing name in the Name field.
3. In the Available Fabrics table, select the fabrics you want to include in the view and use the
right arrow button to move your selections to the Selected Fabrics and Hosts table.
The Available Fabrics table displays the names and the number of products in the available
fabrics. If this table is blank, it may be because all fabrics have been selected and are
displayed in the Selected Fabrics and Hosts table.
To select more than one row, press CTRL and click individual rows. To select multiple
sequential rows, press SHIFT and click on a sequence of rows.