Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1616)

1544 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
GSLB policy management
39
FIGURE 706 Policy Configuration dialog box - Metrics tab
4. Provide the following information on the Policy Configuration dialog box.
a. Enter a policy name for the GSLB policy in the Policy Name field. The combination of a
GSLB policy name and the Management application user who created it must be unique.
b. Select the policy type from the Policy Type list. Options include the Global or Host policy
types.
c. In the Protocol Status Interval field, specify how often the site ADC/ADX products report
their session list statistics and CPU utilization to the GSLB ServerIron ADX product.
d. Specify the health status in the Health Status Interval field. This number determines the
interval at which the ServerIron ADX products report the health check information to the
GSLB ServerIron ADX product.
NOTE
If the health status interval is configured globally (that is, if the policy type is Global), the
interval applies to all peer site ADC/ADX products that support the distributed health
check feature.