Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2240)

2168 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
About user privileges
D
SAN - FCIP Management Allows you to configure
FCIP tunnels and
troubleshooting of IP
interfaces (IP
performance, IP ping and
IP trace route). Disables the Configure >
FCIP Tunnel and Monitor
> Troubleshooting > FCIP
commands. Disables the
FCIP Tunnel command on
the Fabric right-click
menu. Enables the Configure >
FCIP Tunnel and Monitor
> Troubleshooting > FCIP
commands.
Only enables the Cancel
function for the dialog box
boxes. Enables the Configure >
FCIP Tunnel and Monitor
> Troubleshooting > FCIP
commands.
Enables all commands
and functions on the
associated dialog box
boxes. Also enables all
commands on the FCIP
Tunnels tab in the
device’s Properties dialog
box.
SAN - FICON
Management Allows you to configure
Cascade FICON Fabric
and Cascade FICON
Fabric Merge.
Also allows you to
configure block ports and
allow/prohibit matrix on
active configuration or
any offline configurations. Disables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Disables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu. Disables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Enables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Disables all commands
and functions on the
Configure Allow/Prohibit
Matrix dialog box except
the Close and Help. Enables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Enables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Enables all commands
and functions on the
associated dialog box
boxes.
SAN - High Integrity Fabric Allows you to set Fabric
Binding and Insistent
Domain IDs.
Disables the High
Integrity Fabric command
from the Configure menu. Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Cancel and Help. Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box.
SAN - Logical Switch
Configuration Allows you to create a
new logical switch, assign
and remove ports from a
logical switch, delete a
logical switch, configure a
logical fabric, and change
the fabric ID of a logical
switch.
You must be assigned to
the 'All Fabrics' resource
group to access Logical
Switch Configuration
feature. Disables the Logical
Switches command from
the Configure menu. Enables the Logical
Switches command from
the Configure menu.
Disables all functions
from the dialog box
except view.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box. Enables the Logical
Switches command from
the Configure menu.
Enables all commands
and functions on the
dialog box.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box.
SAN - Port Connectivity Allows you to view all of
the port details and
connected devices. Disables the Port
Connectivity command
from the Monitor menu
and right-click menu. Enables the Port
Connectivity command
from the Monitor menu
and right-click menu. Enables the Port
Connectivity command
from the Monitor menu
and right-click menu.
TABLE 220 SAN privileges and application behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write