Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1142)

1070 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Creating a new encryption group
25
FIGURE 452 Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
After configuration of the encryption group is completed, BNAthe Management application
sends API commands to verify the switch configuration. See
“Understanding configuration
status results” on page 1082 for more information.
11. Click Next.
The Next Steps dialog box displays. (Refer to Figure 453 .) Instructions for installing public key
certificates for the encryption switch are displayed.