Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 154)

84 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP Object identifier filters
3
IP Object identifier filters
The object identifier (OID) filter allows you to select which product types to include or exclude from
discovery.
If you add a third-party product OID to the Included Product Types list during discovery and later
move it to the Excluded Product Types list, note that you will not be able to discover a new device
with that product OID. However, other functionality such as traps, fault management, statistics,
performance data collection, product polling for health monitoring and so on continue to run as
with any other discovered product.
Including product types
To include third-party product types in discovery, complete the following steps.
1. Select Discover > IP Products.
The Discover Setup - IP dialog box displays.
2. Click the Global Settings tab.
3. Click the OID Filter tab.
FIGURE 24 OID Filter tab
4. Select the Discover third party products check box to include third-party devices in discovery.