Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2190)

2118 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN shortcut menus
A
SAN shortcut menus
You can use the Management application interface main menu to configure, monitor, and
troubleshoot your SAN components. The instructions for using these features are documented in
the subsequent chapters of this manual.
IP Addresses. Select to run a report on IP addresses on
the network.
MAC Addresses. Select to run a report of MAC addresses
on the network.
Product CLI. Select to run a product CLI report.
Deployment. Select to run a deployment report.
Host Adapters — Select to run a Host product report.
Inventory Report — Select to run a Host inventory report.
Faulty SFP Report — Select to run a faulty SFP report.
Tools Menu
Address Finder. Select to search for IP or MAC addresses
on the network.
Setup. Select to set up the applications that display on
the Tools menu.
Product Menu. Select to access the tools available on a
device’s shortcut menu.
Tools List (determined by user settings). Select to open a
software application. You can configure the Tools menu
to display different software applications. Recommended
tools to include in this menu include an internet browser,
the command prompt application, and Notepad.
Help Menu
Contents. Select to open the Online Help.
Find. Select to search the Online Help.
License. Select to view or change your License
information.
About Management_Application_Name. Select to view
the application information, such as the company
information and release number.
Menu Command Command Options