Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2137)

Brocade Network Advisor SAN + IP User Manual 2065
53-1003155-01
IP report types
52
To print the selected report, refer to “Printing SAN reports” on page 2062.
To export the selected report, refer to “Exporting SAN reports” on page 2061.
To delete the selected report, refer to “Deleting SAN reports” on page 2062.
4. Click Close to close the View Reports dialog box.
5. Click Yes on the “are you sure you want to close” message.
For more information about zoning, refer to “Zoning” on page 1167.
IP report types
The following standard report types are available from the Reports menu:
• Event Custom Reports — For detailed information about this report, refer to “Event custom
reports” on page 1959.
• Wired Products — The Wired Products report displays general and detailed configuration
information about wired products managed by the Management server. For detailed
information about this report, refer to
“IP Wired Products report” on page 2068.
• AP Products — For detailed information about this report, refer to “IP Wired Products report” on
page 2068.
• Modules — The Module List report presents the modules installed in discovered IronWare or
third-party products and in which products they are installed. For detailed information about
this report, refer to
“Module List report” on page 2077.
• VLANs — A list of port VLANs configured on IronWare or third-party products is available in the
Port VLANs report. For detailed information about this report, refer to
“Port VLAN report” on
page 2078.
• IP Subnets — The IP Subnet report displays the list of IP subnets discovered on the network. To
appear on this list, the subnet must contain at least one discovered product. For detailed
information about this report, refer to
“IP Subnet List report” on page 2079.
• IP Addresses — The IP Address report displays all discovered IP addresses of wired products on
the network. For detailed information about this report, refer to
“IP Address List report” on
page 2079.
• MAC Addresses — The MAC Address report shows the MAC addresses of wired products that
have been discovered on the network. For detailed information about this report, refer to
“MAC
Address List report” on page 2080.
• CLI Deployments Report — CLI deployment reports provide information about product
configuration and monitoring definition deployments performed from the CLI configuration. For
detailed information about this report, refer to
“CLI deployment reports” on page 1421.
• Configurations — Deployment reports provide information about deployments performed from
the Management application. For detailed information about this report, refer to
“Deployment
reports” on page 2082.
• Host Adapters — For detailed information about this report, refer to “Host adapter reports” on
page 2096.
NOTE
ATM ports are not displayed in reports. The ATM module may appear in the report, but the modules
will be listed as having no ports.