Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 110)

40 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN discovery overview
3
Discovering fabrics
NOTE
Fabric OS devices must be running Fabric OS 5.0 or later.
NOTE
Only one copy of the application should be used to monitor and manage the same devices in a
subnet.
NOTE
When accessing additional data from the SAN Inventory or SAN Status widgets, it takes a few
moments to populate newly discovered products in the SAN Products - Status dialog box (where
Status is the section of the widget you selected).
To discover specific IP addresses or subnets, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
FIGURE 8 Discover Fabrics dialog box
2. Click Add to specify the IP addresses of the devices you want to discover.
The Add Fabric Discovery dialog box displays.