Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 261)

Brocade Network Advisor SAN + IP User Manual 191
53-1003155-01
SNMP Trap forwarding credential settings
5
FIGURE 74 Options dialog box (Trap Forwarding Credentials pane)
3. Enter the unique community string (case sensitive, 1 to 16 characters). in the Community and
Confirm Community fields.
Displays as asterisks. Allows all printable ASCII characters.
4. Click Apply or OK to save your work.
Configuring SNMP v3 credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays ( Figure 74 ).
3. Enter the SNMP v3 name (case sensitive, 1 to 16 characters) to identify the credentials in the
User Name field.
Allows all printable ASCII characters.
4. Select on of the following authentication protocols from the Auth Protocol list.
• HMAC_MD5 (continue with step 5 )
• HMAC_SHA (continue with step 5 )
• NONE (go to step 6 )
5. Enter the SNMP v3 authentication password (case sensitive, 1 to 16 characters) in the Auth
Password and Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
6. Select one of the following privacy protocol types from the Priv Protocol list.
• CBC-DES (continue with step 7 )
• CFB_AES-128 (continue with step 7 )