Configuring an internal ftp server, Accessing the ftp server folder – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 288
218
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Software Configuration
5
File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer to
another over a TCP computer network. During installation, a built-in FTP server and its services are
installed. Other FTP servers on your system are recognized by the application as external FTP
servers.
For Windows systems, the built-in FTP server is the default configuration and installation starts the
FTP service if port 21 is not used by any other FTP server. For UNIX systems, built-in FTP is the
default for UNIX systems during installation; the external FTP server is the default only if port 21 is
busy.
Note that when uninstalling the application the built-in FTP server is removed with all other services
even if the FTP service is used by firmware upgrade or supportSave features.
NOTE
FTP is supported on all Fabric OS devices.
Secure Copy (SCP) is a means of securely transferring computer files between a local and a remote
host or between two remote hosts, using the Secure Shell (SSH) protocol. You must configure SCP
on your machine to support Technical Support and firmware download.
NOTE
SCP is supported on Fabric OS devices running 5.3 and later.
SSH File Transfer Protocol (SFTP) is a network protocol used to transfer data from one computer to
another over a secure channel. You must configure SCP on your machine to support Technical
Support and firmware management.
NOTE
SFTP is supported on Fabric OS devices running 7.0 and later.
The built-in SCP/SFTP servers use the port 22 by default.
To view the port status for the FTP and SCP/SFTP servers, refer to
Accessing the FTP server folder
Choose from one of the following options to access the FTP server folder:
•
To access the internal FTP folder, select Monitor > Techsupport > View Repository.
•
To access the external FTP folder, type the following in a browser window:
ftp://Username@External_FTP_Server_IP_Address
(for example, ftp://[email protected]) and press Enter. Type your password in the pop-up
window and press Enter. The external FTP folder displays.
Configuring an internal FTP server
To configure the internal FTP server settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select FTP/SCP/SFTP in the Category list.
The FTP/SCP/SFTP pane displays (
Figure 84
).